DRY ICE BLASTING APPLICATIONS:
Parts Finishing
Dry ice blasting is a faster and more uniform solution to parts finishing
Dry ice blasting is an effective solution to remove burrs and flash from machined and molded parts. Dry ice is non-abrasive and does not create secondary waste, which ensures the geometries of the finished part are maintained without leaving residual media.
![DRYICEBLASTING_APPLICATIONS_SURFACEPREPARATION-6-1-1200×675](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_SURFACEPREPARATION-6-1-1200x675-1.jpg)
![Before](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-2-1200x675-1.jpg)
![After](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-1-1200x675-1.jpg)
![Before](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-3-1200x675-1.jpg)
![After](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-4-1200x675-1.jpg)
![Before](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-5-1200x675-1.jpg)
![After](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_INDUSTRIES_AUTOMOTIVE_PARTSFINISHING-4-4-1200x675-1.jpg)
![Before](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-8-1200x675-1.jpg)
![After](https://coldjet.asquaresoftware.com/wp-content/uploads/2020/04/DRYICEBLASTING_APPLICATIONS_PARTSFINISHING-7-1200x675-1.jpg)
SPECIFIC USE CASES
Dry ice blasting safely removes flash and burrs from parts made from a variety of materials
RELATED INDUSTRIES
- PEEK
- PBT
- Acetal
- Nylon
- LCP
- PP
- ABS
- UHMWPE
- Nitinol
- Acrylic
- Phenolic
BENEFITS OF DRY ICE BLASTING
Improve part quality, while reducing operating costs
Dry ice cleaning eliminates manual deburring and deflashing processes, leading to higher quality finished parts in a fraction of the time.
![PARTS-FINISHING-500×383](https://coldjet.asquaresoftware.com/wp-content/uploads/2019/12/PARTS-FINISHING-500x383-1.jpg)
→ Non-abrasive
Will not damage part geometry
→ Improve product quality and decrease scrap rates
→ Eliminate manual deburring and deflashing
→ No secondary waste
Eliminate risk of grit entrapment
→ Deburr and deflash faster and more uniformly